How many U-joints does a Dodge 2500 have?
If you do not own a 6 speed manual Ram 2500 then you’ll need to determine what kind of cab you have on your truck. If you have a regular cab or a quad cab you’ll only need 2 u-joints. If you have a quad cab with a long bed then you’ll need 3 joints.
How much does it cost to replace rear U-joints?
The u-joint replacement cost is estimated between $225 and $300. Labor makes up about $100 to $125, while the parts should be between $125 and $200. However, these prices vary based on what make and model vehicle you drive.
What happens if a rear u-joint fails?
If you think you might be dealing with a bad u-joint, you should address the problem right away. A u-joint that fails completely can cause the driveshaft to fall out of the undercarriage, potentially causing significant damage to the vehicle and even an accident, maybe.
How long does it take to replace a rear u-joint?
On a typical labor book, a U-joint replacement is one or two labor hours, meaning that a $25 part can cost substantially more once someone else installs it for you and charges around $100/hour.
How often should you grease u-joints?
every 5,000 miles
Be sure to grease your u-joints every 5,000 miles (or as recommended by the manufacturer). They’ll likely last longer than permanently sealed u-joints.
Are u-joints all the same?
Nearly all U-joints have one side that is pressed into a welded-in yoke while the other side bolts into the other yoke. The press-in sides use C-clips to hold the caps in place. There are outside and inside locks, and in most cases they are not interchangeable.
Can I change U joints by myself?
Replacing these joints is a fairly straightforward job, though it takes some prior experience. To begin, you’ll need a universal joint pressing tool. You can also take advantage of the loaner tools program at your local Advance Auto Parts store. Then follow these step-by-step instructions on how to change U joints.
How long do U-joints last on a truck?
forever
U-joints should last forever – or at least the life of the vehicle.
How do I know what size u-joint I have?
You measure from the outer side of the lock ring groove side to side. This gives you the width of the joint lock. You still need to measure the overall width of the joint to make sure it is compatible with the bolt-on yoke.
Should you replace u-joints in pairs?
Quality Matters. If one of your u-joints has failed, the right replacement parts will make all the difference. It’s important to replace your u-joints in pairs, even if one of them seem like it is still good.
How many miles should u-joints last?
In most cases, you have to grease your u-joints every 5,000 miles or so. When you fail to service your u-joints on a regular basis, they will fail. You don’t have to worry about this problem with maintenance free u-joints. Misalignment: This happens when you change the vehicle’s ride height.