What is water soluble cutting oil?
Water-based cutting oils are the most popular cutting fluids in use today, because they combine the lubricating qualities of oil with the cooling properties of water and can be used in a wide range of both machining and grinding operations. 2. It is very important to measure the concentration after mixing.
What are the properties of cutting oil?
The desirable properties of cutting fluids in general are (Boston, 1952) 1) High thermal conductivity for cooling 2) Good lubricating qualities 3) High flash point, should not entail a fire hazard 4) Must not produce a gummy or solid precipitate at ordinary working temperatures 5) Be stable against oxidation.
Can you mix water with cutting oil?
Why should water-soluble cutting oil be poured into water and not the other way round? When water is mixed with oil very quickly, this unstable mix separates into 2 phases, with water on one side and oil on the other. An emulsifying agent is therefore required to bind these two water and oil phases into a stable mix.
What is the purpose of soluble oil?
Soluble Oil is a general-purpose, low odour soluble cutting oil designed as a coolant and lubricant during metalworking operations. It is made from hydrotreated base oils and a special blend of inhibitors, lubricity additives and emulsifiers.
What are the types of cutting oil?
Types of Cutting Fluids:
- #1. Straight Oil. Stroth oils are non-emulsifying.
- #2. Soluble Oil. Soluble oils are made by mixing mineral oil, water, & coupling agents.
- #3. Mineral Oil.
- #4. Synthetic Liquids.
- #5. Semi-Synthetic Fluids.
- #6. Solid and Paste Lubricants.
- #7. Cutting Oil.
- #1. Machining Process Type.
What are the characteristics of a cutting fluid?
What are the different types of cutting fluid?
Types of cutting fluids
- Soluble oils (emulsions) Soluble oils are stable emulsions formed by the addition of mineral oil to water in specified proportions (usually 1-20% of oil to water).
- Straight oils.
- Synthetic fluids.
- Semi-synthetic fluids.
- Cooling.
- Lubrication.
- Improvement of tool-life.
- Removal of chips.
How do I choose cutting fluid?
The choice of cutting fluid depends on the material being machined and the types of machine being used….Cutting oil
- High demands on lubrication.
- High demands on surface finish.
- Hard-to-machine materials.
- “Maintenance free”