What does it mean when your check engine light flashes 11 times?
It means that one or more of the emissions systems is not ready, also known as the I/M readiness test. All the systems will be tested as you drive the vehicle, and the light usually stops blinking after a few driving cycles.
What causes engine misfire?
From the spark plugs to the ignition coils, many different things can cause an engine to misfire. The most common causes of misfires are worn, improperly installed, and mishandled spark plugs, malfunctioning ignition coils, carbon tracking, faulty spark plug wires and vacuum leaks.
Is it OK to drive a car that is misfiring?
Driving with a misfiring engine may not be dangerous right away, but over time it will wear on your engine and you can potentially damage the vehicle. If you lose power while driving on a busy road, this is a safety hazard.
What do the warning lights on my Renault Clio mean?
Red-colored warning symbols suggest a warning that must be attended immediately. Yellow and orange warning lights Indicate less severe issues and mean that a service is due. Green and blue Indicators provide information to the driver. When one or more airbag of your Renault Clio fails, this light comes on.
What does the toxic fume light mean on a Renault Clio?
Renault Clio Toxic Fumes Warning Light The toxic fume filter warning symbol appears on the dashboard of your Renault Clio when toxic fumes are emitting from the engine. If you see the light flashing, reduce the speed and wait for the light to turn off. If you see the light on continuously, seek qualified assistance immediately.
How does the stop and start work on a Renault Clio?
The Renault Clio automatic engine stop and start system helps to reduce fuel consumption and lower exhaust emissions. Stop and start is activated automatically when the vehicle is started, but can be manually switched off. When your vehicle comes to a standstill, the system stops the engine (standby) and automatically restarts when you move off.
What should I do if my battery charge warning light is flashing?
If the light flashes, reduce the engine speed until light stops flashing and seek assistance from an approved technician. When the ignition is switched on, battery charge warning light will illuminate and extinguish a few seconds later.