Does a Ford Explorer have a rear differential?
We are proud to offer this remanufactured Rear Differential for the 2012-2015 Ford Explorer SUV with Four Wheel Drive. This rear diff can be configured with either a 3.55 or a 3.73 gear ratio, depending on the stock configuration of your Explorer SUV.
How do I know if my Ford Explorer is 8.8 rear end?
You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.
How much is a used differential?
For a rebuilt differential, you might need to spend between $400 and $1,000. On the other hand, replacing a differential costs $1,000 to $2,000 on average.
Is Posi the same as limited-slip?
TOM: Actually, Jeannie, “posi-traction” is just Chevrolet’s name for limited slip differential on passenger cars. RAY: Normally, on a rear wheel drive car, the power is delivered to both of the rear wheels equally.
How much is a used rear differential?
Depending on the make and model of your car, as well as its condition, expect to spend between $1,500 to $4,000. The other factor is if you buy a new rear-diff or a used/rebuilt one.
How much does a used differential cost?
What is the rear differential size for a 2002 Ford Explorer?
We are proud to offer this remanufactured 8.8-inch Rear Differential for the 1998-2002 Ford Explorer SUV. This rear diff can be configured with either a 3.55, 3.73, or 4.10 gear ratios, depending on the stock configuration of your Explorer SUV…
What kind of engine does a Ford Explorer have?
In the early 1990s, Ford started of light with the 4.0 liter Cologne engine. As more engineering took place, a varying number of ratios were developed. The most common gearing for rear differential in Ford Explorer SUVs includes the following:
What kind of rear differential does a 1997 Ford F150 have?
We are proud to offer this remanufactured 8.8-inch Rear Differential for the 1997-1998 Ford F-150 Pickup Trucks with Limited Slip and 12mm wheel studs. Compatible with either two-wheel or four-wheel drive trucks. This rear diff is
What do I need to replace inside the rear differential?
In a regular scenario, you might need to swap more than just the ring and pinion gear inside the differential. The rear bearing assembly and its shims could be required on a routine installation.