How do I add a motion in CATIA?

How do I add a motion in CATIA?

Tutorial: Making an animation out of any simulation in Catia V5.

1. Tools->image->video.
2. Follow the instructions on the image serially.
3. Press the record button.
4. Click on “simulation with commands”
5. Click on the “play” button to simulate and record the frames. Was this tutorial useful? Like.
6. 4 likes.

How do you build a wall in CATIA?

Creating Walls from a Sketch

1. Click Sketch then select the xy plane .
2. Click Profile .
3. Sketch the profile as shown below:
4. Click Exit workbench to return to the 3D world.
5. Click Wall in the Walls toolbar. The Wall Definition dialog box opens.
6. Select the desired profile positioning option.

How do you fix a part in CATIA Assembly?

Fixing a Component

1. Click the Fix component icon: Fix in Space.
2. Select the component to be fixed, that is the light blue component. The constraint is created.
3. Move the fixed component using the compass.
4. Update the assembly to see which component is moved: the fixed component returns to its previous location:

How do you constrain parts in Catia Assembly?

Select the Constraints of Given Components: Select the components, right-click and select xxx object -> Component Constraints contextual command. Editing Constraints: you can cut and paste , copy and paste and even delete constraints. Update an Assembly: constraints displayed in black indicate they need an update.

How do you make joggle in Catia v5?

The joggle is a feature, which cannot exist alone; it is always defined on a surfacic flange or a web….Creating a Joggle by Selecting an Offset Surface

1. Click Joggle .
2. Select Surfacic Flange.
3. Select Surface in the Offset Type field.
4. select Symmetry.
5. Click OK .
6. Click Joggle again.

How do you fix components?

There are two ways of fixing a component: by fixing its position according to the geometrical origin of the assembly, which means setting an absolute position. This operation is referred to as “Fix in space”. by fixing its position according to other components, which means setting a relative position.

What is the purpose of using assembly constraints?

Assembly constraints establish the orientation of the components in the assembly and simulate mechanical relationships between components.

Which constraints are used in assembly?

Constraints in Assembly Design

• The Fix Constraint.
• The Offset Constraint.
• The Coincidence Constraint.
• The Angle Constraint.
• The Contact Constraint.

What is the use of Move tool bar in assembly design and how it works?

The Smart Move tool works as a multipurpose tool. This tool has the capability of manipulating and snapping components and can also apply constraints to them, if required. To invoke this tool, choose the down arrow besides the Snap button to invoke the Snap toolbar.

Can you simulate in CATIA?

The Digital Mock-Up (DMU) Kinematics workbench, available in CATIA, allows users to create simulations of assemblies. To have access to this workbench, the KIN product must be installed and available in your licence. For CATIA V5 PLM Express configurations, the KIN product is available as part of the PRX enabler.

What is joggle depth?

For a non-linear flange, the Joggle Length is the arc length of the contour line in the joggled region plus. the runout and clearance distances. Joggle Depth is always equal to the depth parameter. value.

How do you joggle sheet metal?

To form the joggle, use the following procedure:

1. Lay out the boundary lines of the joggle where the bends are to occur on the sheet.
2. Insert the sheet in the brake and bend the metal up approximately 20° to 30°.
3. Release the brake and remove the part.
4. Turn the part over and clamp it in the brake at the second bend line.

How do you make an assembly Float?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do you move fixed parts in SolidWorks?

Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

What is assembly constraint Catia?

Constraints allow you to position mechanical components correctly in relation to the other components of the assembly. You just need to specify the type of constraints you wish to set up between two components, and the system will place the components exactly the way you want.

How many types of assembly constraints are available in Catia?

There are four basic assembly constraints, each with unique solutions and options. Used to define a tangential relationship between two parts. The tangent constraint is generally applied to circular faces and planar faces.

How to open a SolidWorks file in Catia?

Autodesk Alias (*. wire)

How to make bolt in Catia?

1

How to change units in Catia automatically?

To change the units, simply click the drop-down list at the bottom of the units window and select the desired unit. Your data will automatically be updated throughout the DCS model. How do you display parameters in Catia tree?

How to design stop valve body in Catia?

The intelligent design integration gateway between electrical (ECAD) and mechanical (CATIA) design, is the ideal tool for building a complete electromechanical model. Catelectre Easy to use interactive application for managing requirement, traceability and impact analysis across different systems, programs and project levels across the entire