How do I reset the F21 code on my washing machine?
Sometimes your washer might display the F21 error code when it shouldn’t, and a simple reset will get your washer working again. To reset your washer, you simply need to press “Pause/Cancel” to cancel the current wash cycle.
How do you clear the error code on a Whirlpool Duet dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
Why is my Whirlpool front load washer not draining?
The drain hose may be too far down inside the drainpipe (standpipe) or laundry tub. Drained water can siphon back into the washer if the drain hose extends too far. Make sure that the drain hose does not extend more than 4.5″ (113 mm) into the drainpipe or laundry tub.
What does code F mean on Whirlpool Duet washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
How do you drain a duet washing machine?
Pull the bottom of the access panel toward you and pull it down to release it from the washer. The drain pump is under the Duet washer drum and has two hoses.
How do I reset my Whirlpool front loader washing machine?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.
Is there a reset button on a Whirlpool washing machine?
Follow these steps to reset a Whirlpool washing machine: Make sure the power to the washer is turned on at the wall, but keep the Power button on the control off. Hold the Program button down while simultaneously pressing the Water Level button two times. When done correctly, the control panel lights should illuminate.
How do I fix F21 error on my Whirlpool duet washer?
F-21 Error on a Whirlpool Duet Washing Machine 1 Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. 2 Drain Hose. If the “F21” error code repeats after performing the reset, a problem exists with the drain system. 3 Standpipe or Drain Facility. 4 HE Detergent. 5 Service.
How do you fix a whirlpool duet washing machine that won’t turn on?
Disconnect power to the Whirlpool Duet washing machine and wait 30 seconds. Plug the washing machine back into the power supply and select a new cycle. Contact Whirlpool for assistance if the “F21” code comes back after power is restored. Meredith Jameson writes early childhood parenting and family health articles for various online publications.
What does the error code F21 mean on a Kenmore washer?
The most common causes of the F21 error code are: The drain pump has a blockage or is faulty and needs to be replaced. The drain filter on the drain pump is blocked or clogged. The drain hose is blocked or bent. Other less common causes include:
Where is the drain filter on a whirlpool washer?
Many Whirlpool washers have a drain filter connected to the drain pump. Like the drain pump, small items can end up in the drain filter and restrict the washer’s ability to drain. Once you remove the access panel, the drain filter should be easy to locate and clear.