How do you spray tectyl 506?
Tectyl 506 can be applied by low pressure air spray or brush. Removal: TECTYL 506 can be removed with mineral spirits or any similar petroleum solvent, hot alkaline wash or low pressure steam. If dried and cured the film of TECTYL 506 can also be removed with Tectyl Biocleaner.
Does tectyl 506 dry?
TECTYL 506 cures to a dark amber colored, waxy, translucent, firm film. Superior Protection: At the recommended DFT TECTYL 506 will protect against corrosion during storage, domestic and overseas transport….Typical properties.
| Typical properties | |
|---|---|
| Dry to touch time at 20°C: | 2 hours |
| Cure time at 20°C: | 24 hours |
Does tectyl stop rust?
Tectyl 506 is a preventative compound for rust prone surfaces providing protection against the damaging effects of moisture, chloride and corrosion.
Can you paint over tectyl?
TECTYL 5638W can be applied with a spatula or with special spray equipment. TECTYL 5638W can be painted over, when dry, with synthetic resin-, epoxy- and PVC-based paints TECTYL 5638W is fast drying (by evaporation of water) to a black, hard film.
What is tectyl coating?
Tectyl is a global brand of rust preventative coatings. Our superior corrosion protection offers customers the confidence, reliability, reputation and high-quality standards.
Is tectyl flammable?
Specific hazards: Extremely flammable aerosol. May form flammable vapour mixtures with air. Flameproof equipment necessary in area where this chemical is being used.
Who makes tectyl?
Daubert
Since 1935, Daubert has provided corrosion protection solutions that have greatly extended the life of a wide variety of manufactured products. Wherever there are tough conditions in transportation, mining, construction and other industries, there’s Tectyl® protection there.
What is tectyl 900 used for?
Tectyl® 900 was developed to protect and lubricate small arms and automatic weapons. It is a general-purpose lubricant in all applications where water displacement, water resistance, corrosion protection and/or low temperature performance is required.
What is the water displacing version of Tectyl 506-wd?
Tectyl 506-WD is the water displacing version of Tectyl 506. It is is a wax based, solvent cutback corrosion preventive compound.
What is tectyl506 used for?
See Full Shipping Terms Tectyl506 is a preventative compound for rust prone surfaces providing protection against the damaging effects of moisture, chloride and corrosion. Excellent for long term (up to 5 years) protection of metallic surfaces against corrosion
What is Valvoline Tectyl 506?
Tectyl 506, is a solvent cutback corrosion preventive compound from Valvoline designed for protection of metallic surfaces against corrosion in long-term indoor or outdoor exposure and during domestic and overseas shipment. The dry film is firm, amber, and translucent.