How do I operate my washing machine?
How to use a front load washing machine
- Dose correctly. Follow the instructions on the packaging of your laundry detergent, like Ariel Matic Liquid.
- Load the laundry. Open the door and place the laundry in the machine.
- Choose the temperature.
- Select the right spin cycle.
- Close the door and press go.
- Unload clothes.
What are the auxiliary buttons on a Beko washing machine?
Using the Auxiliary Functions Buttons
- Begin by loading your laundry into the drum.
- Add any detergents and softeners required into the Detergent Door.
- Select a programme using the Programme Selection Knob.
- Choose an Auxiliary Function if it is required (e.g. Prewash).
How do you fix a washing machine that won’t start?
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
What is the tap symbol on Beko washing machine?
The “water tap” symbol appears in the display when there is a problem with the water inlet. Washing machines without display might show a blinking LED near to the water tap symbol on the front.
What is a cold wash on Beko washing machine?
Cold: This temperature is best for delicate textiles. Special programmes. In addition to the standard programmes above, Beko washing machines offer a range of extra programmes. You’ll be able to adjust the spin speed and temperature on these programmes too.
Can I use my new washing machine straight away?
You waited years for your old washing machine to bite the dust so you could excitedly buy a new one! Then on its first run of your brand new machine shakes so VIOLENTLY it moves across the room.
Why is the tap symbol flashing on my washing machine?
The water supply pressure is low or the water inlet hose is blocked or kinked. Check that the water supply tap is turned on and that the water inlet hose is not twisted, kinked or blocked.
Which drawer does washing powder go in Beko?
The powder detergent goes into the largest section of the drawer, usually on the left hand side. If in any doubt, check your washing machine’s manual. The liquid softener goes into the partially covered section of the drawer with the flower symbol.
How long is a Beko wash cycle?
28 minutes
You don’t need to wait hours for your washing machine to finish its cycle thanks to our Quick programme. You’ll be able to wash a full 8kg load of laundry in just 28 minutes – saving you time and money.
How to install your new Beko washing machine?
Ensure that the electrical mains and water supply are switched off before you start removing your old appliance.
How reliable is Beko?
You need to register your product
How to find serial number in Beko washing machine?
A – China
How to replace the heater on a Beko washing machine?
– The machine will be displaying the error – Check the door is shutting correctly. – Strip down the machine to get access to the door interlock. – Check wiring harness for signs of burnt connections or broken wires. – Replace door lock is faulty. – Reassemble the washing machine test the machine and make sure it starts. If all is ok problem is fixed